Eurogrip Marine
A high friction surface coating for decks and ramps giving improved slip and skid resistance under all conditions.
Safety has never been more important and the public's awareness never so high.
There is a clear need to both incorporate non-slip surfaces into new-build and to improve existing vessels and access ramps to similar standards. Skid resistance is inevitably degraded by use particularly as a result of heavy vehicle and 'tractor' movements and the high shear forces experienced on ramps.
Designed for use with a primer onto deck plate on ferries, car carriers and similar vessels, as well as dockside areas, piers, etc., the Eurogrip Marine system combines tough but flexible polyurethane resins with highly abrasion resistant aggregate. Unlike many systems Eurogrip cures very quickly. Disruption is minimal and a surface can be returned to full use in about 3 hours depending on temperature. It also cures at low temperatures, adheres tenaciously to steel and timber, and does not embrittle with age.
Eurogrip Marine complies with IMO requirements for fire testing.
Benefits
- Improved safety, better breaking, reduced accidents
- Long service life compared with other similar syst
- Minimal disruption to commercial operations (rapid cure)
- Cold applied using mixer and squeegee
- Low hazard materials
- Reduced wear on tractor vehicles
- Resistant to oils and solvents
- Combines high friction with waterproofing
- Minimal maintenance
- Suitable for a wide range of substrates (steel, bitumen, timber, etc)
Uses
- Improving friction on Deck Plates, Ferry Ramps, Car Carriers.
- Improving friction on Dock Side Areas, Piers, Jetties, Pontoons and Steps.
